DIY Tea Light Holder

*Sneeze*

Ok.
Resurrecting from my bedroom, I'm gonna show you how I did this

DIY Tea Light Holder

made with

A little slice of a birch branch 

Metal wire

Natural twine

Supplies:

Curved long-nose pliers

Superglue

Scissors

Huge mattress Needle (or a thin nail and a hammer)

Get some slices from a birch branch.

You can get them with a buzz or a ribbon saw.

If you're not into such things and you want to save a little money, ask to your husband/boyfriend/neighbor

:)

With your needle, or with a nail and a hammer, pierce de slice all around and get 12-15 holes.

Cut the wire into pieces... One for each hole and long about 5 -5.5 inches (12-13 cm)

Work the wire with the pliers and get a curl at the top of each wire.

Paste the wires with some SuperGlue in the holes.

Give the wires a bulging shape.

When you're done, take the twine and go in and out from the wires, alternating like in the picture below:

Add some extra metal-wire-curls.

This is what you'll get!

Hope you like it.
Have a nice week! :)

“Thousands of candles can be lit from a single candle, and the life of the candle will not be shortened. Happiness never decreases by being shared."

Gautama Siddharta - Buddha

Love♥, Chiara